ATTENTION!
Setting and changing codes must be done when the "OPEN" lock position is switching on.
Orders have an effect upon the both of keyhandles at once.
Function 9:
To switch the confirmation of pressing the buttons by blinking the light-emitting diode on
The function switches confirmation of pressing the keypad's buttons by blinking the light-emitting diode on. The mode has setted by default.
For example, [*] [#] 9 [#] 1234567 [#] |
Function 10:
To switch the confirmation of pressing the buttons by blinking the light-emitting diode off
The function switches confirmation of pressing the keypad's buttons by blinking the light-emitting diode on. The mode has setted by default.
For example, [*] [#] 10 [#] 1234567 [#] |
Function 11:
To switch the confirmation of pressing the buttons by the buzzer sound on
The function switches sound confirmation of pressing the keypad's buttons on. The mode has setted by default.
For example, [*] [#] 11 [#] 1234567 [#] |
Function 12:
To switch the confirmation of pressing the buttons by the buzzer sound off
The function switches the sound confirmation of pressing the keypad's buttons off. The mode has setted by default.
For example, [*] [#] 12 [#] 1234567 [#] |
Function 25:
To switch the confirmation of lock fastening on
To make sure that the lock is fastening after closing a door, i.e. the door is closed and the croos-bar is moved out fully, there is the light and/or sound indication in the lock. This mode turns the function on.
For example, [*] [#] 25 [#] 1234567 [#] |
Function 26:
To switch the confirmation of lock fastening off
To make sure that the lock is fastening after closing a door, i.e. the door is closed and the croos-bar is moved out fully, there is the light and/or sound indication in the lock. This mode turns the function off. The mode has setted by default.
For example, [*] [#] 26 [#] 1234567 [#] |
|
