The lock is equipped with mechanisms that enable seeing to undesirable and extreme situations occured at the process of lock exploitation and signal about it.
In the lock there is the socket of external connections where a signal comes to the one of socket pins in a case like code matching or opening under duress.
Function 13:
To activate the mode of protection from code-matching with the indication of blocking the electronic lock
To activate the mode of protection from code-matching an alarm signal is submitted (through alarm control line) for 2 seconds, and further codes
(even correct ones) does not lead the lock opening. In setted mode the blocked lock reacts by the long signal of indication.
Blocking when code matching has been carried on occur only with that keyhandle where a code is being matched.
For example, [*] [#] 13 [#] 1234567 [#] |
Function 14:
To activate the mode of protection from code-matching without the indication of blocking the electronic lock
Operation of function is same as at activating function 13, but at blocking the lock imitates normal operation. However even dialling a right code is misinterpretted. Unblocking the lock will be carried in 3 minutes from that moment when buttons are pressed (at unfastening the lock by the OPEN button or by means of the line of external opening) last time.
For example, [*] [#] 14 [#] 1234567 [#] |
Function 15:
Prohibition of the function of code-matching protection
Switch code-matching protection off.
For example, [*] [#] 15 [#] 1234567 [#] |
Function 16:
Mode of Opening under duress
On reducing a one of the code's digits in a unit, the lock opens but at the same time an alarm signal is submitted.
For example, [*] [#] 16 [#] 1234567 [#] |
Function 17:
To switch the mode of Opening under duress off
Switch the mode of Opening under duress off.
For example, [*] [#] 17 [#] 1234567 [#] |
Function 19:
To switch an alarm signal on unlocking on
To use the lock together with a security system there is the devices carring out an alarm signal when the lock is unfastening (with a master code, user's code, a key, a button of the remote control and when a door is broke open) in the lock. The function switches the mode on.
For example, [*] [#] 19 [#] 1234567 [#] |
Function 20:
To switch an alarm signal on unlocking off
Switch the mode of a alarm signal on any unlocking off.
For example, [*] [#] 20 [#] 1234567 [#] |
NB! Using function 16 and 17. If the modified code coincides with one of the users' codes alarm signal will not be submitted!
For using "opening the lock under duress" only users' codes can be modified. The master code can not be modified and accordingly can not be used to open the door under duress!
|
