ATTENTION!
Setting and changing codes must be done when the "OPEN" lock position is switching on.
Function 29:
To change the master code
The master code (Administrator's code) allows unfastening the lock, setting user's codes and lock's function. The master code couldnot be cancelled and blocked.
[*] [#] 29 [#] [ MC] [#] [ nMC] [#] [ nMC] [#] For example, [*] [#] 29 [#] 1234567 [#] 7654321[#] 7654321 [#] |
Function 0:
To set and change a user's code
User's code can be set and changed by the administrator by means of the master code.
It can be changed by the user if he has such permission. In this case in the algorithm [MC] is changed into [UC].
[*] [#] 0 [#] [ UN (1-24)] [#] [ MC] [#] [ nUC] [#] [ nUC] [#] For example, [*] [#] 0 [#]10 [#] 1234567 [#] 1976 [#]1976 [#] |
Function 1:
To permit for a user to change his code
Application of this function enables a user to change his own code. Also it enables using code if this mode is cancelled by the function 6 or when the single usage has been already performed. At setting this mode the code has become multiple automatically.
[*] [#] 1 [#] [ UN (1-24)] [#] [ MC] [#] For example, [*] [#] 1 [#] 3 [#] 1234567 [#] |
Function 2:
To prohibit for a user to change his code
Application of this function prohibits a user to change his code himself by means of function 0.
[*] [#] 2 [#] [ UN (1-24)] [#] [ MC] [#] For example, [*] [#] 2 [#] 13 [#] 1234567 [#]
|
Function 3:
The single-use code
At setting this mode the code couldnt open a door repeatedly after a single usage. NB! If the both keyhandle are the handle of code dialling, a single-use code enable opening a one time from any sides. The used code has not be lost and it can be activized again by means of functions 1,3,4 or 5. At setting the code as a code for a single use the function 3 enables using the code if this mode is cancelled by the function 6 or when the single usage has been already performed.
[*] [#] 3 [#] [ UN (1-24)] [#] [ MC] [#] For example, [*] [#] 3 [#] 7 [#] 1234567 [#] |
Function 4:
The multiple-use code
In order to make the code multiple it is necessary to set the function 4. Application of this function enables using the code if this mode is cancelled by the function 6 or when the single usage has been already performed.
[*] [#] 4 [#] [ UN (1-24)] [#] [ MC] [#] For example, [*] [#] 4 [#] 5 [#] 1234567 [#] |
Function 5:
To permit a user's code to be used
It is used to controll the quantity of users and limit it. At setting the mode the user's code has become permitted automatically.
[*] [#] 5 [#] [ UN (1-24)] [#] [ MC] [#] For example, [*] [#] 5 [#] 8 [#] 1234567 [#] |
Function 6:
To cancel a user's code
If it is necessary a user's code can be cancelled temporarily or constantly. In this case this code has not been lost and it can be activized againby means of functions 1,3,4 or 5. By the function 6 the user's code can be disabled temporarily, for instance, on the holiday's time.
[*] [#] 6 [#] [ UN (1-24)] [#] [ MC] [#] For example, [*] [#] 6 [#] 15 [#] 1234567 [#] |
NB! The lock is supplied by the one code - the master code - 1234567. The user's codes have not been entered. There are no "PIN", "PUK" and other special codes opening the lock!
So we recommend explicitly to change the master code after pressing of the Reset button and also when the lock is installed on the door.
Set up a master code the longer the better!
|
