|
[2]
 Choose a groovesuitable for the lock body in the door in correspondence with pic. 7.
Make an reach-through aperture to mount the lock eurocylinder in correspondence with pic. 7.
To fix the lock coaxiality with latch plate there is a controllable spring roller on the surface lock board. Adjusting roller outlet is carried out by means of loosening the screw by a one turn (see pic. 8). This adjustment makes when the lock is mounted in a door. If by chance the door is closed automatically by a door closer, the roller is recommended to fix into the lock body.
Adjust the required outlet of sprung roller on the basis of size of clearance between a door frame and a latch stile which is +3 mm. For example, if the distance between a door and a door frame is 4 mm, it is necessary to set up the roller outlet in 7 mm from the surface lock plate.
[2]
|
