ak-04|changing functions|  service functions

Function 18:

Shifting settings to the initial manufacturer's state

C P 18 P [MC] P [MC] P

For example, C P 18 P 1234567 P 1234567 P

Function 19:

Tis function turn the function 20 off.

C P 19 P [MC] P

For example, C P 19 P 1234567 P

Function 20:

The mode is used when it is necessary to turn any device on and keep it at this condition for unlimited time. At this mode the keypad operates as a switcher, i.e. when a code is dialled, the executive relay will turn on and keep in such position unless a code is entered again or AK-04 power supply is turned on temporary, in that case all settings and codes will save. While the executive relay is turned the right green light-emitting diode will lighten on the keypad for all this time.

C P 20 P [MC] P

For example, C P 20 P 1234567 P

Function 23:

For code-matching protection there is the additional temporal pause after the code is dialled and before the executive relay operates. The pause is setted up from 0.5 to 9 seconds. To set up 0.5-period of time is to enter 0. (Increment - 1 second). This function turns on this mode.

C P 23 P [T] P [MC] P

For example, C P 23 P 3 P 1234567 P

Function 24:

This function set up a temporal period of keeping the executive relay in turning-on position from 0.5 to 9 second. To set up 0.5-period of time is to enter 0.

C P 24 P [T] P [MC] P

For example, C P 24 P 4 P 1234567 P