|
ATTENTION! Setting and changing codes must be done by opened the door or set the switcher of the modes of operation in the "OPEN" position.
Function 1:
To change the master code
The master code (Administrator's code) allows opening the lock, setting a user's code and lock's function. The master code couldnot be cancelled and blocked.
C P 1 P [ MC] P [ nMC] P [ nMC] P For example, C P 1 P 1234567 P 7654321 P 7654321 P |
Function 2:
To set and change a user's code
User's code can be set and changed by the administrator by means of the master code.
It can be changed by user if he has such permission. In this case in the algorithm [MC] is changed into [UC].
C P 2 P [ UN (1-24)] P [ MC] P [ nUC] P [ nUC] P For example, C P 2 P 10 P 1234567 P 1976 P 1976 P |
Function 3:
The single-use code
At setting this mode the code couldnt open a door repeatedly after a single usage. The used code has not be lost and it can be activized again by means of functions 3, 4, 5 or 7. At setting the code as a code for a single use the function 3 enables using the code if this mode is cancelled by the function 6 or when the single usage has been already performed.
C P 3 P [ UN (1-24)] P [ MC] P For example, C P 3 P 7 P 1234567 P |
Function 4:
The multiple-use code
In order to make the code multiple it is necessary to set the function 4. Application of this function enables using the code if this mode is cancelled by the function 6 or when the single usage has been already performed.
C P 4 P [ UN (1-24)] P [ MC] P For example, C P 4 P 5 P 1234567 P |
Function 5:
To permit a user's code to be used
It is used to controll the quantity of users and limit it. At setting the mode the user's code has become permitted automatically.
C P 5 P [ UN (1-24)] P [ MC] P For example, C P 5 P 8 P 1234567 P |
Function 6:
To cancel a user's code
If it is necessary a user's code can be cancelled temporarily or constantly. In this case this code has not been lost and it can be activized againby means of functions 3, 4, 5 or 7. By the function 6 the user's code can be disabled temporarily, for instance, on the holiday's time.
C P 6 P [ UN (1-24)] P [ MC] P For example, C P 6 P 15 P 1234567 P |
Function 7:
To permit for a user to change his code
Application of this function enables user to change his own code. Also it enables using code if this mode is cancelled by the function 6 or when the single usage has been already performed. At setting this mode the code has become multiple automatically.
C P 7 P [ UN (1-24)] P [ MC] P For example, C P 7 P 3 P 1234567 P |
Function 8:
To prohibit for a user to change his code
Application of this function prohibits user to change his code himself by means of function 2.
C P 8 P [ UN (1-24)] P [ MC] P For example, C P 8 P 13 P 1234567 P
|
NB! After changing of all codes you should make sure codes to be setted correctly. If the lock has not opened by means of the new code it is necessary to remove lock's cover and hold the "RESET" button pressed for 6 seconds which is situated on the control card under the batteries holder. In this case all previous codes and settings will shift to the initial manufacturer's state.
|
